Add your motor!
Choose
Close
BRM T-027 Motor 1:24
BRM T-027 motor for slot cars 1:24 scale.
23.500/rpm 212g/cm pinion 9 teeth and wires included.
Hot
Chassis Slot Car Imola 33 Complete 1:24 UNICAR
€ 75,00
“Anglewinder” Slot Car Chassis Imola 33 type photo etched, complete and adjustable. Steps from 91/99mm, front suspensions, for medium sized car bodies 1:24. UNICAR
5 in stock
Additional information
| Weight | 0.500 kg |
|---|---|
| Dimensions | 32 × 25 × 18 cm |
| Trademark | Unicar 2018 |
| Scale | 1:24 |
| Chassis | Imola 33 Chassis |
Related products
Close
6 Front Tyres for Polistil Evolution 1:32
High Performance urethane front Tyres for Polistil 1:32 scale Slot Car. Suitable for Fomula 1 and Prototype Evolution series cars from the 1970s (Tyrrell, Ferrari, McLaren, Matra, Shadow, UOP etc.). Super performances.
Close
6 Rear Tyres for Polistil F1 Champion 175 1:32
High Performance urethane rear Tyres for Polistil 1:32 scale Slot Car. Suitable for Fomula 1 series Champion 175 cars from the 1980s. Super performances.
Close
Body 206 Dino Pininfarina Yellow/Red for Policar 1:32
206 Dino Pininfarina body painted Yellow/Red in resin for Policar 1:32 Slot Car. Manufactured by Toptoys.
Close
Body BRE Samurai Silvered for Policar 1:32
BRE Samurai Body in Resin Painted Silver/Red for Slot Car Policar 1:32. Manufactured by Toptoys.
Close
6 Front Tyres for F1 Fixed 60s Policar 1:32
High Performance urethane front tyres for 1:32 scale Policar Slot Car. Suitable for Fomula 1 fixed wheel cars from the 1960s (Ferrari 156, Ferrari 158, Cooper, BRM, Lotus, ATS). Exceptional performances.
Close
Body 206 Dino Pininfarina Silver/Red for Policar 1:32
206 Dino Pininfarina Body in Painted Silver/Red Resin for Policar 1:32 Slot Car. Manufactured by Toptoys.
Close
Mabuchi Motor FT-270S 1:24
Mabuchi Motor FT-270S for high performance 1:24 scale Slot Car, has the same measures as a 26D engine and can be installed in its place. It is installed on bearings and has a balanced wheel. It can run at 44,500 r.p.m.
Close
BRM T-027 Motor 1:24
BRM T-027 motor for slot cars 1:24 scale.
23.500/rpm 212g/cm pinion 9 teeth and wires included.
